PS-525
Price: $5,450.00
PURCHASE DIRECT FROM FACTORY
The PS-525 Pitot-Static tester is a low-maintenance digital tester that is fully portable. It is powered by 24 volts DC, or by its two internal re-chargeable batteries, which enable the test set to be used completely independent of any external power source.
The PS-525 also includes an encoder reader which will display gray code and RS232 at speeds of 1200, 2400, and 9600 baud.
The PS-525 is designed and priced for non-RVSM markets, and includes two quick-connect hoses, 24 VDC power adapter, calibration certificate, and a limited 2-year warranty.
This product is ideal for performing simple go/no-go leak tests, as well as for general use as a pitot-static tester. It only requires an annual calibration, and the sensors are technician-proof, which contributes to reduced annual maintenance costs.
See product demonstration videos below!
The PS-525 tester is specifically designed and priced for non-RVSM use. Many times there is a need to do a 91.411 test at a remote location or hangar where there is no power source available. In these cases, the PS-525 test box is the ideal tool, due to its full portability.
The price includes the test box, wall power adapter, two 20-feet hoses with connectors, and the manual. There are no test cables or other adapters included
Many avionic shops and aviation maintenance facilities are eager to replace their old steam-gauge style test boxes, with their delicate instruments and high maintenance costs. The PS-525 is the ideal replacement, due to its size, durability, lower cost, and portable convenience.
The outside dimensions of the PS-525 test box are: 12.5”D X 15”L X 9.5 ”H (32x38x24 cm) . This small size makes the box very portable at only about 20 lbs (9 kgs), easy to handle, and will easily fit into baggage compartments.
Notable Features:
Fully portable
Rechargeable batteries for 8 hours of use on one charge
Illuminated LCD displays
Encoder Reader
Lightweight – about 20 lbs
Physical Dimensions: 12.5”D X 15”L X 9.75 ”H (32x38x24 cm)
Available Options:
Hansen quick connectors (standard)
Swagelok quick connectors
Internal rechargeable batteries (standard)
220VAC external power supply (no additional charge)
Internal 110VAC or 220VAC power supply (with no internal batteries) (no additional $ charge)
Other Features:
Leak test feature: 2 minutes, selectable down to 30 seconds
VSI (vertical speed indicator)
What is included:
1 x Power Adapter
2 x Hoses 20ft (about 6 meters) in length
1 x Product Manual
1 x Calibration Certificate valid for 1 year
Note: The PS-525 does NOT have the precision required to test RVSM altimeter systems.
Preston Pressure warrants its products against defects in workmanship and material under normal, intended use for a period of two years from the date of purchase. The batteries are warranted for a period of 90 days from the date of purchase. Valves are warranted for a period of 180 days.
If you are not satisfied with the performance of the PS-525 pitot-static tester, you may return it for a full refund, if returned within 30 days.
Returned products must be in original condition (normal, minor wear is acceptable).
Shipping costs are not refundable.
-
The PS-525 tester has separate, independent pumps for vacuum and pressure. Each are activated with their own switch as the operator deems necessary.
The PS-525 incorporates reservoirs (holding tanks) for both the vacuum and pressure systems. The pressure and vacuum levels within these tanks are reflected in the pressure and vacuum gauges on the front panel. These gauges enable the operator to monitor the pressure and vacuum, and then activate the pump switch for the system on an as-needed basis. This eliminates the need to keep the pumps turned on at all times, and extends the pump life and battery charge. The gauges also enable the operator to see if the pressure or vacuum levels are dropping quickly, in the case of a leak in the aircraft system, and respond accordingly.
All three LCD displays of the PS-525 pitot-static test box include back lights. This enables the operator to clearly see the displays in dim lighting conditions, as well as in direct sunlight. The backlights can be turned off by pressing both Exit buttons simultaneously.
-
The Encoder Reader is pinned to match the ACK A-30 digitizer, and will provide selectable 12 or 24 volts. Tester is protected with internal glass fuse.
Individual gray-code lines can be displayed for troubleshooting.
Compatible with outputs of the following altitude encoders:
ACK (gray code, 1200, 2400, 9600 baud)
Shadin (gray code, 9600 baud)
Trans-Cal (gray code, 1200, 2400, 9600 baud)
Ameri-King (gray code)
The Encoder Reader is compatible with the following RS-232 protocols:
Garmin 1200, 9600 baud
Northstar 2400 baud
Shadin 9600 baud
UPS AT, Apollo 1200 baud
Trimble 9600 baud
Note: Due to the many encoder versions, and their individual pin-outs, no encoder extension cable is provided. The operator may configure an extension cable as needed.
The encoder reader tests the operation of the altitude digitizer. It does not test the transponder!
-
Digital Altimeter:
Display Range – model PS-525: -1000 to 35,000 feet (-305 to 10,700 meters)
Display Range – model PS-525A: -1000 to 50,000 feet (-305 to 15,240 meters)
Vacuum Pump Range – model PS-525: up to 35,000 feet (-305 to 10,700 meters)
Vacuum Pump Range – model PS-525A:up to 50,000 feet (-305 to 15,240 meters)
Resolution:
Sensor Accuracy:+/-10 ft @ 0 ft, +/-20 ft @ 35,000 ft, +/-50 ft @ 50,000 ft
-1500 to 20000 feet: 1-foot increments
20000 to 30000 feet: 2-feet increments
30000 and up: 5-feet increments
All metric resolution is in 1-meter increments
Temperature range: 32 degrees F to 125 degrees F (0 C to 51 C)
Other Measurement Units:
inHg (inches of mercury): 0.295 to 32.48 in increments of 0.01
mBar (milli bars): 10 – 1100 in increments of 0.1
PSIA (pounds/square inch): 0.145 to 15.95 in increments of 0.01
mm HG (millimeters of mercury): 7.5 – 825 in increments of 0.1
Digital Airspeed:
Range: 18 – 650 Knots, 34 – 1204 KPH, 0.00 – 1.00 Mach or 21 – 748 MPH
Resolution: 1 MPH, 1 KPH, and 0.1 Knot
Sensor Accuracy: +/- 1.5 knots
Temperature range: 30 degrees F to 125 degrees F (0 C to 51 C)
E.P.R. (engine pressure ratio): 0.07-6.00
Power Source:
External: 24 VDC (from a 110 or 220 VAC adaptor)
Internal: 12/24 VDC (internal rechargeable batteries)
Optional: 110/220 VAC Mains powered, without internal batteries
Current draw:
Display only: 125 mA
370 mA with vacuum pumps operating
320 mA with pressure pump operating
540 mA with all systems operating (and no encoder attached)
-
